STS Motorsport - H&R Suspension - Other
Triple C Camber Adjustment Bolts
Whenever you lower a vehicle's ride height, negative camber is increased - how much depends on the vehicle and the reduction in ride height. H&R's new Triple C camber adjusters are a simple, yet very effective means of removing excessive camber, adjusting your vehicle's camber settings, or even correcting small side-to-side camber variations for precise alignment.
Consisting of a pair of specially-designed bolts, H&R's patented Triple C camber adjusters replace the original upper fastening bolts on all McPherson strut applications. Allowing adjustments from 0-3 degrees, positive or negative. Quite simply, H&R's Triple C camber adjusters are a great value. No other single suspension modification can yield such impressive results with such a small investment in time and money-and you can do it yourself.
H&R ETS – electronic lowering systems
The H&R electronic lowering module ETS is a product for cars which have an OE air- or ABC-suspension.
By using the H&R ETS module the car is lowered by approx. 40mm which does not only change the centre of gravity but also optimize the driving dynamics as well as the driving safety. A sporty performance and harmonic optics is given.
The H&R ETS module consists of an electronic hardware-module including plug connectors, a TÜV approval and a detailed mounting instruction.
The H&R ETS module can be re-installed easily and is available for the following cars:
- Audi A8 Type 4E, , A6 Typ 4F
- Bentley Continental GT
- Mercedes Benz E-Class (W211) / CL (W215) / S-Class (W220) / SL (R230) / CLS S-Class (W221) M-Class (W164) (219 K)
- Porsche Cayenne with air suspension
- VW Touareg with air suspension
- VW Phaeton with air suspension
Truck Components
H&R produces the highest quality truck suspension parts for many popular truck and SUV models. Raising and lowering springs, rear shackles, shocks, cup kits, coil overs, sway bars, and TRAK+ Wheel Spacers are all available. As with all H&R products, H&R truck springs and suspension parts feature the same top-of-the-line engineering and performance and are among the best performing products in the industry.
H&R truck components are designed with ride comfort, performance, and safety all taken into account. H&R truck suspension parts correct the less-than-optimal handling, braking, and ride comfort that is unfortunately so common in the truck market. In addition to raising or lowering the vehicle, H&R truck suspension kits level the front and rear ride height to improve your trucks look. This levelling of the truck also drastically improves stability, handling and braking. H&R's most popular truck parts include the 2004-up Ford F-150 Rear Shackle kit, Ford Escape Sport Spring Kit, 1990-95 Toyota 4Runner Sport Spring kit, and H&R's complete line of truck and SUV TRAK+ Wheel Spacers.
H&R produces suspension kits for all manner of Truck and SUV, including: BMW X3 / X5, Cadillac Escalade, Chevrolet Suburban, GMC Tahoe, Ford Escape / F-150 / Expedition, Jeep Grand Cherokee / Wrangler, Mercedes Benz M-Class, and Toyota 4Runner. Also available are H&R TRAK+ Wheel Spacers in many bolt patterns and stud/bolt type to fit nearly all domestic truck models from GM, Chrysler, and Ford.
Sway Bars
H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits. Designed to reduce body roll, increase lateral stiffness and improve handling, H&R Sway Bars are crafted from a special 50CrV4 spring steel that is both stronger and more resilient than competitive sway bars. H&R Sway Bars are bent on proprietary machines designed by H&R that seamlessly produce beautiful complex curves making H&R Sway Bars a perfect fit for your vehicle.
All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
Like all H&R components, H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
